Deep Groove Ball Bearing

Bearing with a riveted stamped metal cage
Filled with a polyalkylene glycol/ graphite combination for lubrication
Running-in period required to distribute the lubricant within the bearing for applications that stand idle for an extended period
Not for wet or humid environments
Single-row, pre-lubricated, typical accuracy.
Deep Groove Ball Bearings will be just about the most widely used rolling bearings. They are being used to support radial and axial loads in both guidelines.
With small friction and high-limit speed, Ball Bearings are cost-effective and need little maintenance.
Chromium Steel (GCr15) made with heat treating, provides great and uniform hardness, very good wear resistance, and huge contact fatigue performance.
Suitable for all types of professional equipment, micro motor, little rotary electric motor, office equipment and so forth.
Cages – Selection of cage types to fit your application needs: steel, solid brass or polymer
TOP QUALITY Steel – Ultra clean metal made to extend bearing life by up to 80%
Advanced Grease Technology – NSK lubricants made to extend grease lifestyle and improve bearing performance
Super Finished Raceways – Specially honed to minimize noise and improve the grease distribution
Patented Seals – Give a barrier to contamination in hard environments.
Electrically insulated ball bearings available
Outer diameters up to 2500 mm
This type of ball bearing it often the most famous due to its versatility. They will be perfect for high speeds and will handle a good radial load potential, all will hardly any maintenance required.
“Deep Groove” identifies the race (the groove where in fact the balls relax). There is consequently a larger space between your inner and outer bands, compared to the diameter of the ball. This leaves space for the rubber seals.
The objective of a ball bearing is to determine the relative position of two parts (usually the shaft and the bearing housing) also to ensure their free rotation while Deep Groove Ball Bearing china transmitting the strain between them. At large rotational speeds (for example in gyro ball bearings), this application can be extended to include free rotation without almost put on in the bearings. To do this, the two elements of the bearing can be separated by a coating of adhesive liquid film named an elastic hydrodynamic lubricating film. pointed out that flexibility could be maintained not merely when the bearing bears the load on the shaft, but also when the bearing is usually preloaded so that the positioning precision and stability of the shaft does not exceed 1 microin or 1 nanoin. Hydrodynamic lubricating film.
Deep groove ball bearings mainly consider radial load, but also can support radial and axial load. When the simply radial loads, the contact angle is zero.
When the deep groove ball bearings with a more substantial radial clearance, with angular speak to bearings can bear large axial load, deep groove ball bearing friction coefficient is small, the speed limit can be high.

Solo row deep groove ball bearings will be manufactured as start type (unsealed), sealed and shielded, the most famous sizes of deep groove ball bearings happen to be also produced in sealed versions with shields or get in touch with seals on one or both sides, the bearings with shields or seals on both sides are lubricated for life and are maintenance free. A sealed bearings seals possesses get in touch with on the bearings interior and external, a shielded bearings shield possesses speak to on the outer only, and Shielded bearings are primarily designed for applications where in fact the inner band rotates. If the outer ring rotates, you will find a risk that the grease will leak from the bearing at excessive speeds.
Double-row Deep Groove Ball Bearing own deep uninterrupted raceways and substantial conformity between your balls and raceways.
They could carry axial loads acting in both directions furthermore to radial loads.Dual row deep groove ball bearings will be
very ideal for bearing arrangements where the load carrying ability of a single row bearing is inadequate. For the same
outside and bore diameters, double row bearings are a little wider than solitary row bearings but have considerably higher load
carrying capacity than solitary row bearings in the 62 and 63 series.
EPT deep groove ball bearings for extreme temperatures correspond in style to standard one row deep groove ball bearings of the same size. They have no filling slots and will accommodate typical axial loads furthermore to radial loads. The radial inner clearance can be a multiple of C5 to prevent the bearings from seizing, even though they cool swiftly. All areas of the bearing and shields will be manganese phosphated to improve adhesion of the lubricant to the metallic and provide additional safeguard against corrosion.