Forged from hardened steel
Heat treated to endure tough conditions
Engineered an accurate fit
To quickly find your slip yoke, use the filters under for tranny model, spline count and more. Remember when searching based on transmission model that some transmissions have several different end result shaft spline counts, just like the GM T5 27 spline and Ford T5 28 spline yoke. Always verify your outcome spline count.
Slip yokes can be found in a large assortment of dimensions to accommodate for the infinite quantity of applications that require a drive shaft. The word “slide yoke assembly” is used interchangeably with the terms “slip yoke” and “slip”. The only big difference among these conditions is a “slip yoke assembly” includes a dust cap, which is usually given any slip yoke that’s sold as a person part and essential when installed in a drive shaft.
The drive shaft pinion yoke, or slip yoke, allows your drive shaft to flex and the U-joint to rotate properly with the travel shaft. If your yoke is normally failing, you may notice rumbling and vibration from the drive shaft. It is vital to keep carefully the yoke and U-joint lubricated. Dirty grease, or too little grease, may cause severe stress along the driveline and could damage the components. If you need a substitute yoke, We carry travel shaft pinion yokes and grease to continue to keep your vehicle driving smoothly.
Driveshaft slip yokes provide a crucial link in today’s driveline and chassis combinations. Yokes are available in standard length for some street applications with minimal suspension travel to extra-extended for racing suspensions that contain a Driveshaft Yoke radical volume of travel. PitStopUSA.com provides driveshaft slide yokes for many popular transmissions including Powerglide, TH350, TH700R4, Muncie, Saginaw, Torqueflite, C-4, C-6 and even more.
Determine the Series
2. Determine the spline outside diameter and number of teeth.
3. Determine the distance from centerline of joint to end of spline.
Use of the above data will narrow the selection down to a particular yoke shaft with precise dimensions
or a selection of yoke shafts having prevalent dimensions.
Within those common shafts, there might be part numbers which may have different lengths of spline,
unique distances from the finish of the spline to the radius by the neck of the shaft or different
maximum working angles.
Footnotes for parts and assemblies that are discontinued, will end up being discontinued after depletion of
stock, or perhaps not sold separately, are indicated by symbolic next to the component number. Match the symbol
to the correct status at the bottom of the webpage. All other footnotes can be found immediately
below the yoke dimensional data.
Spicer end yokes deliver the same quality and reliability you anticipate from your original equipment parts. That is because they are OE parts, produced to the same specifications and specifications as the end yokes that were installed in your automobile in the first place.
Constructed for precision and sturdiness, Spicer end yokes help to minimize noise and vibration to retain your driveline running smoothly. Furthermore, Spicer driveshaft end yokes are:
OE-quality fit, effectiveness, and reliability
Minimized noise and vibration
Manufacturing that fulfills exacting specifications
The end result is this: Spicer end yokes deliver the same quality and reliability you expect from your own original equipment parts. That’s because they are OE parts-built to the same requirements and features as the drive shaft yokes that were installed in your vehicle in the first place.
Designed to deliver trouble-free, steady performance
Right for your automobile and lifestyle
Made from high-quality materials for greatest durability
Manufactured to meet or exceed strict top quality requirements
As years approved and EPT ongoing to innovate, the company became known for its ability to consistently develop “problem solving solutions.” Today, hundreds of innovations after, EPT is regarded and respected through the entire automotive industry as The Problem Solver. It continues to earn that reputation by providing not only problem-solving parts, but award-winning tech support team and training materials as well.
The slip yoke is an important component of any drive shaft assembly. The slide yoke assembly is normally what allows drive shafts and PTOs to flex or “slip” with their given application. The slip yoke can be essential for enabling u-joints to rotate effectively with the travel shaft.