micro planetary gear motor

The micro plastic gearmotor’s output shaft is compatible with this 14 mm wheels. We do not have any brackets for this gearmotor, and it generally does not possess any installation holes, but its compact size makes it easy to fasten with tape or glue. On the other hand, since this gearmotor is nearly the same size as a 1/4″ fuse, it could be mounted using standard 1/4″ (6 mm) fuse clips.

Motor accessories

The next diagram shows the micro plastic gearmotor dimensions in mm. The planetary Micro Planetary Gear Motor gearbox has a D-shaped plastic result shaft, which is 2 mm in diameter with a section that’s flattened by 0.5 mm. The “D” part of the shaft is certainly 2.5 mm long. The motor steps 6 mm in diameter and 9 mm long, and the gearbox duration, labeled “L” in the diagram below, depends upon the gear ratio. The 26:1 gearbox is 7.1 mm long, as the 136:1 option procedures 9.4 mm. The motor leads include their guidelines pre-stripped and extend around 2 cm (0.8″) from the trunk of the motor.

Gearmotor dimensions

Because the gearmotor’s output shaft is nylon, there may be small variances in the diameter from unit to unit. These variations may cause press-match attachments like our 14 mm wheel to fit loosely occasionally. If you experience a loose fit, you could try swapping wheels or using a little dab of glue to help contain the wheel on.