servo gearhead

Servo gearheads provide mechanical benefit by multiplying electric motor torque while reducing the driven load’s reflected inertia back to the motor.

We supplies the widest selection of gear technologies providing optimal solutions much beyond the features of other gearhead suppliers.
Are you aware why we still use today gearboxes while servo motors becoming servo gearhead stronger and more advanced? The gearboxes are found in many situations in mixture with a servo electric motor, for example because they have low backlash and are able to cope with high torque. But nonetheless we didn’t give a remedy to the previous issue: why! In this article we discuss the operation of a servo drive and translate this to the gearboxes.
Technically translated tis means to follow or execute a command. A servo engine follows the (complex) task given to him.

For industrial applications, servo motors are used where a drive-system needs to be accurate or highly dynamic. The opinions to the electric motor is done through a resolver (analogue sensor of rotation) or encoder (digital sensor of rotation). A servo electric motor is controlled by a servo amplifier, perhaps with a shaft controller.

The rotation frequency of the actuator is given back by the resolver or encoder. This is capable as well as the rotational swiftness, also to determine the position of the rotor and the path of rotation. The servo amplifier compares the set rotational frequency with the measured rotational frequency. Right now the servo amplifier can drive the actuator to the required values.
Interesting, AC Servo Motors have no significant disadvantages more! Therefore, why would you utilize a gearbox?
This has the next reasons:

If you want a very low swiftness, possibly in combination with a higher torque.
If you want high torque. (Actuators with high torque can be found, but they are exponentially more costly compared to the smaller servomotors)
Inertia matching, in order to prevent that the strain determines the behaviour of the motor.
To be able to absorb the high radial or axial forces of the application form.
If you want to go “nearby” otherwise the servomotor sticks out the application. Gearboxes are available in right-angled versions.
Baldor’s GBSM-series of low backlash, servo electric motor rated gearheads, mount easily and directly onto AC brushless servo motors to supply industrial motion control products with torque multiplication and proper inertial matching. These gearheads are made for servo applications needing precision, durability, and long trouble-free operation.