Taper Adapter

The Taper Install Direct Thread Adaptor provides a direct thread interface for taper mounted suppressors. Two models of wrench flats help to make it equally easy to attach or take out from the suppressor or your firearm’s muzzle threads. No proprietary tools necessary. Obtainable in 1/2×28 and 5/8×24 with 18x1mm support coming soon. While it is convenient to have immediate thread suppressor ability that may move from host to host with no need for extra muzzle equipment, it is necessary to remember that every host firearm should be examined for baffle alignment via visible inspection before firing.

The 1/2×28 Insert can be used with cartriges up to 30 caliber and the 5/8×24 works extremely well up to .338 caliber.

The use of immediate thread adaptors increases on immediate thread mounted suppressors, by allowing the end user to have modular thread pitches. One Taper Install Suppressor to Rule Them All.
Black Nitrided
1.5 Ounce Weight
Wrench Flats for every contingency
Taper Install Repeatability and Stability
Multi-Thread versatility for your Taper Attach Suppressor
taper adapters allow the use of holders or equipment with a different machine-side taper then your machine spindle taper, such as for example by using a BT40 tapping chuck on a 50-taper spindle.

These adapters eradicate lead time losses in the event of a equipment breakdown. Adapters may also help in testing custom equipment on another machine than the planned production machine.

Taper adapters avoid the necessity for a way to obtain new holders or tools for a Taper Adapter particular machine. They arrive prepared to apply with built-in locked clamping mechanisms featuring a clamping screw on a ball bearing for steep taper clamping or HSK locking product for taper clamping.
The steep taper is the standardised form of a tool taper for clamping tools in the main spindle of a machine tool
The steep taper is standardised in DIN 69871 part 1
No self-locking (on the other hand with the Morse taper), thereby making tool adjustments easier without clamping. This is specifically significant for automatic tool changes
Little clamping travel equals short clamping time
High torsional rigidity due to the short distance between your leading edge and spindle bearing (short overall length)
For adapting morse taper tools to milling equipment that take R8 tools
Alloy steel hardened to 50-52 rc
Critical surfaces precision ground
Use in R8 Machines
Turning Equipment More taper reducing sleeve can be used to convert your headstock from #2 MT to #1 MT. This is useful if you have a travel centre or pen mandrel which is usually 1MT and your headstock is 2MT