Product Description
Concrete Mixer mitsubishi concrete mixer concrete mixer for tractor with pto
Twin shafts mixer and Planetary mixer both are presented.
Twin shafts mixer: Mixing Blade and scraper
With 17% – 23% Cr Chromium
There is oil temperature tests sensor within the reducer.
Test oil temperature instantly
Planetary mixer: The mixers with vertical shafts let the rapid mixing of all sorts of top quality concrete (dry, semi-dry and plastic).
The excellent flexibility of the mixer permits it to be used not only in the manufacturing of concrete,
but also in the mixing of components for the generation of glass, ceramics, refractory components, and so forth.
| Planetary Mixer Complex Parameters | ||||||
| Model |
Filling Quantity(L) |
Feeding Capability(KG) |
Compacted Concrete(L) |
Mixing Electrical power (KW) |
Mixing Star*MixingBlade (Qty) |
Weight (T) |
| MP50 | 75 | one hundred twenty | 50 | three | 1*2 | .7 |
| MP100 | one hundred fifty | 240 | 100 | 5.five | one*2 | 1 |
| MP250 | 375 | 600 | 250 | eleven | 1*two | 1.eight |
| MP330 | 525 | 790 | 330 | 15 | 1*two | two.2 |
| MP500 | 750 | 1200 | 500 | eighteen.5 | one*two | two.5 |
| MP750 | 1125 | 1800 | 750 | 30 | one*three | 3.5 |
| MP1000 | 1500 | 2400 | a thousand | 37 | two*two | 5.five |
| MP1500 | 2250 | 3600 | 1500 | fifty five | 2*two | six.five |
| MP2000 | 3000 | 4800 | 2000 | 75 | three*2 | eight.5 |
| MP2500 | 3750 | 6000 | 2500 | 90 | three*3 | ten.five |
| MP3000 | 4500 | 7200 | 3000 | one hundred ten | three*3 | 11 |
| Features | ||||||
JS Twin Shafts Mixer
Introduction of MP Collection Planetary Mixer
| 1.Gearing System | |
| Driving program is made up of motor and hardened floor equipment (patented solution) which is specialized designed by our firm. The increase product has reduced sound, for a longer time torque and far more resilient. Even in rigid production conditions, the gearbox can distribute energy successfully and evenly to each and every mix and unit, ensuring standard procedure, large balance and low maintenance.
|
|
| two.Mixing Device | |
| Obligatory mixing is understood by CZPT moves of extruding and overturning driven by rotating planets and blades. Specialized discharge scraper has been developed in accordance to discharge velocity in buy to improve productivity.
|
|
| 3.Discharging Device | |
| According to the different demands of buyers, the discharging doorway can be opened by hydraulic, pneumatic or by fingers. The amount of the discharging door is 3 at most. And there is particular sealing system on the discharging door to ensure the sealing reliable. | |
| 4.The Hydraulic Electrical power Device | |
| A special created hydraulic electrical power unit is used to offer electrical power for more than 1 discharging gates. Outfitted with manual discharging perform, on unexpected emergency, these discharging CZPT can be opened by hand. |
|
| five.Mixing Locus Diagrams | |
| The diagram demonstrates the best mixing motion of the planetary mixer from 6 to sixty seconds following materials extra. Note that the flooring is fully swept by the mixing star’s motion every 4 revolutions(6 seconds) and that every zone is protected at standard intervals in time. |
|
| 6.Packing | |
Customer Browsing
Speak to us
|
US $15,000-35,000 / Piece | |
1 Piece (Min. Order) |
###
| Type: | Concrete Mixer |
|---|---|
| Shotcrete Type: | Wet |
| Machining Process: | Hydraulic |
| Structure: | Cylinder Type |
| Productivity: | 35m²/h |
| Feeding Height: | 1400mm |
###
| Customization: |
Available
|
|---|
###
| Planetary Mixer Technical Parameters | ||||||
| Model |
Filling Volume(L) |
Feeding Capacity(KG) |
Compacted Concrete(L) |
Mixing Power (KW) |
Mixing Star*MixingBlade (Qty) |
Weight (T) |
| MP50 | 75 | 120 | 50 | 3 | 1*2 | 0.7 |
| MP100 | 150 | 240 | 100 | 5.5 | 1*2 | 1 |
| MP250 | 375 | 600 | 250 | 11 | 1*2 | 1.8 |
| MP330 | 525 | 790 | 330 | 15 | 1*2 | 2.2 |
| MP500 | 750 | 1200 | 500 | 18.5 | 1*2 | 2.5 |
| MP750 | 1125 | 1800 | 750 | 30 | 1*3 | 3.5 |
| MP1000 | 1500 | 2400 | 1000 | 37 | 2*2 | 5.5 |
| MP1500 | 2250 | 3600 | 1500 | 55 | 2*2 | 6.5 |
| MP2000 | 3000 | 4800 | 2000 | 75 | 3*2 | 8.5 |
| MP2500 | 3750 | 6000 | 2500 | 90 | 3*3 | 10.5 |
| MP3000 | 4500 | 7200 | 3000 | 110 | 3*3 | 11 |
| Features | ||||||
###
| 1.Gearing System | |
 |
Driving system consists of motor and hardened surface gear (patented product) which is specialized designed by our company. The improve model has lower noise, longer torque and more durable. Even in strict production conditions, the gearbox can distribute power effectively and evenly to each mix and device, ensuring normal operation, high stability and low maintenance.
|
| 2.Mixing Device | |
|
Compulsory mixing is realized by composite moves of extruding and overturning driven by rotating planets and blades. Specialized discharge scraper has been designed according to discharge speed in order to increase productivity.
|
| 3.Discharging Device | |
|
According to the different demands of customers, the discharging door can be opened by hydraulic, pneumatic or by hands. The number of the discharging door is three at most. And there is special sealing device on the discharging door to ensure the sealing reliable. |
| 4.The Hydraulic Power Unit | |
|
A special designed hydraulic power unit is used to provide power for more than one discharging gates. Equipped with manual discharging function, on emergency, these discharging gates can be opened by hand. |
| 5.Mixing Locus Diagrams | |
|
The diagram shows the perfect mixing action of the planetary mixer from 6 to 60 seconds after materials added. Note that the floor is completely swept by the mixing star’s action every 4 revolutions(6 seconds) and that each zone is covered at regular intervals in time. |
| 6.Packing | |
|
|
|
US $15,000-35,000 / Piece | |
1 Piece (Min. Order) |
###
| Type: | Concrete Mixer |
|---|---|
| Shotcrete Type: | Wet |
| Machining Process: | Hydraulic |
| Structure: | Cylinder Type |
| Productivity: | 35m²/h |
| Feeding Height: | 1400mm |
###
| Customization: |
Available
|
|---|
###
| Planetary Mixer Technical Parameters | ||||||
| Model |
Filling Volume(L) |
Feeding Capacity(KG) |
Compacted Concrete(L) |
Mixing Power (KW) |
Mixing Star*MixingBlade (Qty) |
Weight (T) |
| MP50 | 75 | 120 | 50 | 3 | 1*2 | 0.7 |
| MP100 | 150 | 240 | 100 | 5.5 | 1*2 | 1 |
| MP250 | 375 | 600 | 250 | 11 | 1*2 | 1.8 |
| MP330 | 525 | 790 | 330 | 15 | 1*2 | 2.2 |
| MP500 | 750 | 1200 | 500 | 18.5 | 1*2 | 2.5 |
| MP750 | 1125 | 1800 | 750 | 30 | 1*3 | 3.5 |
| MP1000 | 1500 | 2400 | 1000 | 37 | 2*2 | 5.5 |
| MP1500 | 2250 | 3600 | 1500 | 55 | 2*2 | 6.5 |
| MP2000 | 3000 | 4800 | 2000 | 75 | 3*2 | 8.5 |
| MP2500 | 3750 | 6000 | 2500 | 90 | 3*3 | 10.5 |
| MP3000 | 4500 | 7200 | 3000 | 110 | 3*3 | 11 |
| Features | ||||||
###
| 1.Gearing System | |
|
Driving system consists of motor and hardened surface gear (patented product) which is specialized designed by our company. The improve model has lower noise, longer torque and more durable. Even in strict production conditions, the gearbox can distribute power effectively and evenly to each mix and device, ensuring normal operation, high stability and low maintenance.
|
| 2.Mixing Device | |
|
Compulsory mixing is realized by composite moves of extruding and overturning driven by rotating planets and blades. Specialized discharge scraper has been designed according to discharge speed in order to increase productivity.
|
| 3.Discharging Device | |
|
According to the different demands of customers, the discharging door can be opened by hydraulic, pneumatic or by hands. The number of the discharging door is three at most. And there is special sealing device on the discharging door to ensure the sealing reliable. |
| 4.The Hydraulic Power Unit | |
|
A special designed hydraulic power unit is used to provide power for more than one discharging gates. Equipped with manual discharging function, on emergency, these discharging gates can be opened by hand. |
| 5.Mixing Locus Diagrams | |
|
The diagram shows the perfect mixing action of the planetary mixer from 6 to 60 seconds after materials added. Note that the floor is completely swept by the mixing star’s action every 4 revolutions(6 seconds) and that each zone is covered at regular intervals in time. |
| 6.Packing | |
|
|
PTO Shafts and PTO Shaft Shields
When choosing a PTO shaft, measuring the various pieces is an important aspect. Each piece must be measured in a specific way, with the shaft in a closed position. Measure the length between the outsides of the yokes. The closed length will help you determine the correct PTO series size for the horsepower of your tractor.
540 rpm
A 540 RPM PTO Shaft will fit CZPT PTO models. These shafts are slightly indexed to allow for easy PTO drive hookups. These shafts will also work with 1000 RPM implements. They also feature a snap ring that will allow for quick and easy removal.
PTO shafts are commonly divided into two types: 1000 RPM and 540 RPM. The 540 RPM PTO shafts are smaller, with only six splines, while the 1000 RPM PTO shafts are larger. The 540 RPM version is used with implements that require less horsepower and are made for light-duty use.
The PTO shaft transfers power from the tractor’s engine to a PTO-driven implement. When operating at its recommended speed, the PTO shaft rotates at 540 rpm (9 times per second). The higher speed PTO shafts have more splines.
Safety chains
Safety chains for PTO shafts are an important safety feature to consider when operating a tractor. These chains are welded to the drive end of a tractor or implement. They are used to prevent the plastic shield from spinning on the PTO shaft. The chain’s reaction time is slower than the speed of the PTO shaft, which makes it important for safety.
When operating a tractor, it is important to follow the manufacturer’s instructions and keep the machine and equipment in a safe location. A poorly-guarded PTO can entrap ground personnel or cause a serious accident. Operator awareness is also important. It is important to avoid stepping over a revolving shaft, wearing loose clothing, or making repairs while the tractor is running. It is also important to follow the manufacturer’s instructions and use the PTO for its intended purpose.
The safety chains for PTO shafts must be properly connected and fully functional before each use. During a PTO operation, the PTO shaft may rotate as much as 1000 rpm, which is potentially deadly. In addition to safety chains, the tractor should have a clutch or torque limiter fitted on the implement end.
The PTO shaft must have a correct length for the machine. If it is a sliding metal PTO drive shaft, it is important to lubricate it according to manufacturer’s specifications. Lubrication is recommended after every eight hours of operation. Also, make sure that the button on the end of the PTO shaft moves freely. Hammering it into place can damage the guard and the shaft.
A PTO driveline hazard is one of the oldest farm machinery hazards. It refers to the PTO or Implement Input Connection. There are often protruding pins and bolts on the driveline, which can snag clothing.
Shield
The PTO shaft shield is a protective piece that encloses a PTO shaft. These shields are usually plastic, but some are also made of metal. They are made to protect the PTO shaft from debris, which can cause premature wear and damage to the universal joints. A PTO shaft shield is not a permanent fixture, but can be easily removed for replacement or repair.
The PTO shaft shield should be checked periodically to ensure that it is in good condition. It should have no loose ends or loose bolts. Ensure that the shear bolts and pins are the right length and hardness for the PTO shaft. Additionally, the operator should wear snug clothing to avoid stepping on the PTO shaft while working.
The PTO shaft shield should fit snugly over the PTO shaft. If the PTO shaft is loose, it may be difficult to attach the safety shield. However, with a proper PTO shaft shield, the process should be quick and easy. A CZPT safety clip allows easy removal and prevents co-rotation between the inner driveshaft and the safety shield. The driveline safety shield from RPM Transmissions is made of CZPT, which is a rigid and durable material.
In addition, some machine drive shafts are lacking a shield. This can cause a safety hazard. Without a PTO shaft shield, an operator may accidentally touch the shaft and get injured. These guards prevent this danger by enclosing the shaft in a plastic or metal guard.
The PTO shaft shield is a crucial part of tractor safety. It helps protect the operator from accidental entanglement while operating the tractor. When the PTO shaft stub becomes separated, it can cause severe injuries and even fatalities. Thankfully, the industry has made tremendous progress in reducing the risks associated with PTO mishaps. Operators must make sure they maintain the shields and do not remove them if not in use.
Reverse rotation
The PTO shaft reverse rotation mechanism prevents the main drive shaft from moving in a direction opposite to the direction of rotation of the driven shaft. The mechanism is compact, reducing the length of the rotation shaft. The mechanism includes two reversing members: first reversing member 151 rotates in a clockwise direction and second reversing member 153 rotates in a counterclockwise direction.
In a PTO shaft reverse rotation mechanism, a driven shaft is inserted into a hollow cylindrical body. It is rotatably positioned relative to the main driving shaft 112 and radially symmetrically around it. As a result, the driving and reverse-rotation mechanisms are symmetric.
One such PTO shaft reverse rotation mechanism has a main drive shaft and a driven shaft, and a plurality of transmission units coupled to it. The driven shaft and the transmission member rotate in tandem. The transmission units are arranged radially about the main driving member and the driven shaft. Alternatively, one of the reversing units may comprise the second reversing member and the first driving member.
editor by czh 2022-12-26