Request Custom or
Using miniature gears, Ever-Power provides designed and built exclusive, high precision mini gearboxes that can’t be found anywhere else. Our miniature gearboxes can be found in numerous configurations, including worm and wheel, cross axis helical, bevel, inline spur, and more. We are able to also provide custom micro gearboxes that are designed and built to meet your specific specifications.
E mail us for the mini gearbox your application requires, or demand a quote upon a custom micro gearbox.
Miniature Bevel Gearboxes | Micro Bevel Equipment Drives | Mini Bevel Gearboxes
Miniature Cross Axis Helical Gearboxes | Cross Axis Helical Mini Gear
Cross Axis Helical
Miniature Shaft-to-Bore Worm Gearboxes & Speed Reducers
Miniature 4 Shaft Worm Gearboxes | Mini 4 Shaft Worm Gear Motors
4 Shaft Worm
Miniature Flange Worm Gearboxes | Micro Flange Worm Gear Drives
Miniature Inline Spur Gearboxes | Micro Inline Spur Acceleration Reducers
Micro Gearbox Options
Gearboxes are also called reducers, gear reducers, quickness reducers, gear drives, and gearmotors. All terms can be used pretty much interchangeably. Please note that the links for our little gear drives include information on the full selection of body sizes for that series or style.
Bevel Box Micro Gear Drive
Our bevel box miniature equipment drives are program rated for the the best possible balance of efficiency and cost. Torque could be balanced to meet up your RPM and operating life requirements. Light-weight with low backlash performance (less than 1°, with option of 1/2”).
Result torque: up to 7 oz.-inches
Low backlash: ≈1°, option of 1/2”
Rated for input boosts to 2,000 RPM
Temperature range: -5° to 175°F (-20° to 79°C); optional to -40°F (-40°C)
Cross Axis Helical Miniature Gearbox
Ever-Power’ miniature cross axis helical gearboxes provide relatively high levels of thrust in a concise package. They provide an result shaft at 90° from the input, and are obtainable in gear ratios from 1:1 to 40:1. Lightweight but long lasting, with machined aluminium housings and hardened alloy steel gears.
High efficiency: up to 88% at 1,000 RPM
Low backlash: only ≤30 arc minutes
Rated for input boosts to 4,000 RPM
“Left hand” models available
Miniature 2 Shaft Worm Gearbox
Our miniature 2 shaft worm gearmotors are engineered for ≤30 arc a few minutes of backlash or better. Also called “shaft to bore gearboxes,” the unit provide a single insight shaft that protrudes from reverse sides of the housing; output is certainly a keyed bore. Standard single- and double-end shafts are available and given keys and retainer rings. An array of equipment ratios and input sizes can be found to meet your needs.
High efficiency: up to 86% at 1,000 RPM
Low backlash: ≤30 arc minutes or better
Obtainable in ratios from 5:1 to 120:1
Rated for input boosts to 3,000 RPM
Miniature 4 Shaft Worm Gearbox
Every miniature 4-shaft worm gearbox from Ever-Power features precision-machined hardened metal gears, solid aluminium housings, and long lasting lubrication. They offer two input shafts on opposing sides of the frame, with two output shafts perpendicular to the input shafts. Our mini 4 shaft worm equipment drives deliver high effectiveness functionality with low backlash.
High efficiency: up to 82% at 1,000 RPM
Low backlash: as little as ≈2°
Available with gear ratios from 1:1 to 32:1
Rated for input boosts to 4,000 RPM
Miniature Flange Worm Equipment Drive
These micro flange worm gearboxes create an output at 90° from the input. They deliver superior overall performance in an amazing array applications and are built with little footprints, making them perfect for operations where space is bound. They offer high efficiency with low backlash.
Gear ratios from 6.66:1 to 80:1
High efficiency: up to 83% at 1,000 RPM
Low backlash: as low as ≤4°
Max. input speed: 3,000 PRM
DC motor option available
Miniature Inline Spur Gearbox
Specially engineered for encoder applications, Ever-Power micro inline spur gear drives are available in two frame sizes, and so are rated for boosts to 3,000 RPM. Light weight aluminum housings and stainless steel gears and shafts make these inline spur gearboxes hard and corrosion resistant, for your the majority of demanding applications.
Result torque: up to 125 oz.-inches
Low backlash: as little as 15 arc minutes
Available with gear ratios from 4.96:1 to 3600:1
Optional synchro cleats available
Compact Wormwheel Gearbox
These miniature correct angle worm gear reducers deliver excellent performance with high efficiency, and show rugged construction for challenging power transfer functions. Available in three equipment ratios (5:1, 10:1, 20:1), our compact worm gearboxes are designed in extremely small footprints for applications where space is limited.
90° output angle
Gear ratios: 5:1, 10:1, and 20:1
Up to 12.5 inch-lbs. of output torque
Max. input speed: 3,000 RPM
Compact footprint: 1.5” x 1.5” x 1.08”
Custom Miniature Gearbox
Ever-Power may engineer and manufacture a customized miniature gearbox to meet up your unique specifications. We can produce customized micro gearboxes in virtually any configuration your application requires, with result torque levels as high as 900Nm. We are able to work from your own gearbox designs, reverse engineer a preexisting unit, or help you develop an all-new style that delivers the performance you need. Demand a quote on a custom miniature gearbox or e mail us to discuss your unique requirements.
The Ever-Power Advantage: Small is No Big Problem
Broadest collection of small gear reducers
Greased for life
Modifications and particular ratios available
Custom small gearboxes made to suit
Input & Output Shafts
Input and result shafts with drive important and retainer rings could be supplied to your specifications for just about any of our hollow bore miniature gearboxes. We offer a basic selection of solitary ended or double ended shafts to put together in these gearboxes. All gearbox shafts are given keys and retainer bands.
For P and PF series worm and wheel gearboxes make use of our P/PF gearbox shafts.
For E series crossed axis helical gearboxes use our E gearbox shafts.
For F series spur gearboxes, contact our software engineers to discuss your particular needs.
We offer a broad collection of misalignment shaft couplings in inch and metric bore sizes. Inch and metric precision surface shafts can be found from stock.
Die-cast zinc casing – Various models for hand operation
Compact Worm Gearboxes
4731 to 4742, 4746 to 4767
Ideal for use with crank handle
Main physical dimensions:
P/N 4731 to 4742 40mm x 40mm x 70mm
P/N 4747 to 4767 17mm x 35mm x 42mm
Wide range of ratios from 1:1 to 30:1
1:1, 2:1 and 2.8:1 are not self locking, all the ratios are.
Max. output torques: 2 Nm to 17 Nm
Hand operation only
Direct coupling between servo electric motor and worm gear is among the key strengths of EP worm gearmotors, which combine DC motor technology with exceptional toughness and wear resistance. Motor and gearbox are designed as you single, compact unit. Because of their reduced current draw, these gearmotors deliver more accurate control of operating temperature and higher performance.
45 W to 250 W rated output power
Gearbox centre-centre size 31 mm and 33 mm
Aluminium gearbox casing
Case-hardened, tempered and ground worm
High tin bronze worm gear
Steel shaft planetary gearboxes
Case-hardened and tempered steel gears
Low noise Selection of coupling flanges
We deliver worm gearboxes, spur gearboxes and planetary gearboxes with or without integrated linear lead screw / ball screw adapted to your flexible modular concept.
Based upon this we can select a wide selection of standard customizations to meet up the requirements of various properties that are essential for each application.
If your application requires a gearbox with some special home such as small dimensions or low weight with regards to power, high efficiency, quiet and vibration-free operation, long life, high level of resistance to vibration, pressure or temperature, integrated linear screw, or a combination of this kind of properties, our item range with an increase of than 1000 different standard gearboxes is most likely a good start to have the ability to deliver something that stands out on your side.
Small gearboxes are high-quality gearboxes for standard drives. The electric motor is included with the gearbox right into a single unit (the first equipment is on the motor shaft). Individual gearboxes for link with conventional IEC motors can also be supplied on request.
Due to the complexity of the gearboxes’ configuration, they cannot be purchased in our e-shop. Our specialists will be happy to help you make your selection. We are happy to send you documentation or design the right set directly, on ask for.
VANE MOTORS WITH GEARBOXES
Combinations possible with all our vane motors
ATEX combinations possible
Stainless steel options possible
Special wishes possible
Ever-Power worm gearboxes possess earned a status to be a business benchmark worldwide. Our achievement originated from our relentless drive for quality with state-of-the-art technology, all and will be offering worm gearboxes are inexpensive prices. High flexibility accorded through a broad choice of mounting choices, shaft configurations and engine interfaces, makes the Ever-Power worm gearbox the default choice for the market. The helical-worm and the double-worm version, with or without the torque limiter, add up to the advantage, creating an extremely versatile drive system.
Ever-Power Worm gearboxes provide high torque with low quickness gear ratio. Being simple and compact in style, these gears can achieve higher gear ratio compared to the helical gears. These worm reduction gears having screw type qualities act like helical gears, but its helix angle is typically comparatively larger) and its body is generally quite lengthy in the axial direction. The gears in these gearboxes could be correct or left-handed depending upon the purpose.
Mounting choice include universal housing, side flanges, foot (horizontal and vertical), shaft mounted with torque arm. Obtainable in Solid shafts (solitary or dual), with torque arm or torque limiter.
Top Quality Geared Motors. Ever-Power gearboxes and geared motors are the electro-mechanical key components for low backlash, smoothly running and highly powerful drive systems.
Our high-performance gear units are designed to withstand the toughest commercial applications.
The gear housings are machined on all sides and permit diverse mounting positions and applications, producing them much popular in the industry. Because of this our geared motors tend to be to be found within our customers own devices.
The smooth running of Ever-Power gear units and the outstanding load capacity of WATT teeth are Compact Worm Gearbox achieved with 3D design supported simply by FEM (Finite Element Method). This tooth geometry guarantees optimum rolling get in touch with under load.
The special tooth root design in mixture with tooth helix angle, tooth depth, the components used and surface finish maximizes load capacity. This high gearing capacity allows smaller tires to be used for the same torque, and smaller sized gears with outstanding power density can also increase reliability. Ever-Power geared motors are therefore incredible space savers.
Gearing produced with such micro-geometric precision allows the gearing enjoy necessary for troublefree rolling get in touch with to be substantially reduced and then the gear backlash to end up being minimized.
Dual chamber shaft seals developed by Ever-Power are utilized as standard in parallel shaft, shaft mounted and helical worm gears for a higher level of tightness.
Ever-Power’s modular gear technology meets certain requirements of advanced drive systems:
Excellent power density
Diverse mounting options
Precision Worm Gearboxes & Geared Motors
EP’s precision worm gearboxes are created for those more demanding applications where small size, high torque, high ratio, low backlash, low noise and long lifetime are required. Provided in 9 sizes, these worm gearboxes could be supplied with free insight shaft, with hollow bore insight shaft and electric motor flange, and double reduction mixture units for slow velocity applications. Using cast iron housings, high quality bronze alloy worm wheels and extended life bearings, reliability and efficiency are the key top features of this range.
High Precision Right Angle Transmission
Wide Selection Of Ratios
Special Surface Treatments
Request Custom or