Deep Groove Ball Bearing

Deep groove ball bearings will be the hottest bearing type. As a result, they are Deep Groove Ball Bearing available from LYHY in many designs, variants, series and sizes. Deep groove ball bearings are versatile, self-retaining bearings with sturdy outer rings, inner bands and ball and cage assemblies. These sort of bearings happen to be of basic design, durable in operation and simple to maintain; They are available in single and double row designs and in open and sealed variants.

In a deep-groove ball bearing, the race dimensions are near the dimensions of the balls that run in it. Deep-groove ball bearings can support higher loads. Because of the creation technology used, available bearings can continue to have switched recesses on the outer ring for seals or shields. Because of their low frictional torque, they will be ideal for high speeds.

1. Bearing surface is covered with the anti-rust oil first; Then covered with the plastic-type material film;
2. Then loaded the roller bearings with draft papered professional belts;
3. At last, packing the bearings with wooden box entirely at the outer packing to invoid the rust or the moist;
4. We can also packing the bearings in accordance to clients’ special requirement;

Top quality steel: Ultra clean steel to extend bearing life by up to 80%
Advanced grease technology: LYHY lubricants that may extend grease existence and performance.
High Grade Balls: Silent and smooth operation even at high speed
Super completed raceways: Specially honed to minimize noise and enhances lubricant distribution and life.
Paten seals: Provide resistance to contamination in the toughest environments
Quality Assured: 100% testing ensures total product quality
Our deep groove ball bearings deliver trusted performance in a broad range of applications and conditions. With super-finished raceways and manipulated geometries, our premium style helps ensure consistent top quality. Our portfolio comes with typical, thin section, narrow, large and miniature and extra-little deep groove ball bearings that span 3 mm to 400 mm bore sizes. The extended product line includes a complete giving of available, shields, seals and snap band combinations.
Its chrome steel structure helps it be durable and resistant to deformity under heavy loads. The rubber seals on both sides of the bearing hold lubricant in and contaminants out. This single-row sealed ball bearing is certainly for use in applications that require mixed radial and axial loads and a dependence on high running reliability at high rotational speeds. This kind of applications include clutches, drives, gearboxes, compressors, pumps, turbines, and printing and textile equipment, among others.