Drive sprocket

A chain and sprocket drive is a kind of power transmission in which a roller chain engages with two or more toothed wheels or sprockets, used in motors as a drivefrom crankshaft to camshaft.
Ever-electric power is proud to stock a wide selection of Sprockets along with this huge variety of agriculture, gardening, preparing and outdoor items. We stand behind all 26,000 things we sell with this Satisfaction Guarantee. CUSTOMER SUPPORT is the cornerstone of our family business, and has been for over 50 years.
Ever-power travel sprockets provide tough, reliable service and feature replaceable tooth plates for easy field maintenance. Tooth plates for 102 and 142 series chain can be found with a segmental/symmetrical reversible tooth profile. The 142 DBL, TPL as well as the 175 and 260 series use our non-symmetrical profile.
Travel sprockets weren’t always designed to be bolted on. At one time these were welded onto the final drive motor and needed to be lower off if they were replaced. Gradually, welded-on adapters were set up that allowed the sprocket to become bolted on, and more modern designs utilize the bolted approach altogether.
When someone sends in a final drive motor for us to have a look at or?rebuild/reman, we advise them to eliminate the sprocket. We don’t want the sprocket in spot to evaluate the electric motor and the added excess weight (which can be significant) unnecessarily enhances your shipping costs.
Signs of Sprocket Wear
The teeth on a travel sprocket are where you search for wear . They should be tall and smooth towards the end, not sharp or dished by the end. And the sprocket, and even more specifically its teeth, start to wear, its diameter becomes small. This causes what is known as a pitch mismatch, where in fact the tooth on the sprocket no more interact with the track links as effectively. This may accelerate the use of the sprocket and decrease the efficiency of your tools.
If your sprocket shows sign of excessive wear, then its time to displace it before it starts to cause abnormal track wear or commences to negatively affect the performance of your final drive motor.
Preventing Sprocket Wear
Among the key ways to prevent accelerated sprocket dress in is to check on the track tension. If the tension is too tight, it’ll cause put on on the sprocket pearly whites. We’ve talked before about the importance of keeping the undercarriage clean, and the health of the undercarriage can affect the track tension (especially if there is a build-up of dried mud and debris). That’s part of the purpose we put so much focus on keeping the undercarriage clean
With out a functioning drive sprocket, your track drive won’t manage to propel your equipment. Fortunately, there are methods to help your drive sprocket go longer: keep carefully the track tension at an effective level and continue to keep your undercarriage clean.
The undercarriage of your track equipment ought to be inspected regularly. If you discover early wear or harm to your tracks, a worn sprocket could be the cause.
15 cogs / teeth
16.77 inches in diameter
12 equally spaced bolt holes
Fits the following Bobcat Compact Track Loaders: T180, T190, T550, T590
Parts can vary according to your serial number.
All Ever-ability sprocket tooth profiles are induction hardened to 55 Rockwell C., and are replaceable. The substitute and protection of tooth plate segments does not require removal of the travel shaft, bearings, etc. Ever-power also designs customized split hub parts for retrofit applications that sprockets minimize field labor costs.
At first glance, you might think that if you’ve seen one drive sprocket, you’ve seen all of them. However, Ever-electrical power possesses added an I.D. lip and spiral ring that captivate the needle bearing along with an exterior snap ring that raises performance and stability. While simple to overlook, it’s this focus on detail that the racer possesses come to expect from Ever-power.
An We.D. lip and spiral ring that captivate the needle bearing
External snap ring caps sprocket on drum & increases durability
CNC-machined teeth feature a corrosion-resistant finish
Chain Type: #219
Tooth Configuration: Standard