Single and dual reduction planetary equipment hydraulic planetary drive drives to be used with electric, hydraulic, air motors or mechanical power input from high velocity, low torque sources to deliver decreased speeds at increased torques. The input aspect has regular SAE pads for engine mounting. Available in the three result configurations shown below. Many units can be furnished with an integral parking brake.
Single reduction drives are limited by 3500 RPM input; double reduction drives to 5000 RPM. Units with essential parking input rate is limited to 2500 RPM.The same torque is available in either direction of rotation. Torque ratings are intermittent. For continuous operation reduce torque ratings to about 1/3 to 1/2 the values shown. Models provide 95% power tranny efficiency.
Wheel Drive
Input side has standard SAE pads and splined insight. Output aspect has hub for installation automobile wheel. Free wheel can be done by using the springtime disconnect to disengage the drive shaft. The disengage feature is standard on all wheel drives.
Shaft Output
Input side standard SAE pads with splined input. Output side choices include: Keyed circular, hexed, hollow, tapered or splined shaft.
Spindle Drive
Input side is regular SAE pads with splined input. Output side includes a flanged spindle for coupling to the strain.
Swing Drives
Ever-Power model 6 is offered with or without integral parking brakes. The “SW” Power Wheel offers extra-large tapered roller bearings, a ductile iron hub and heat treated ring gear to reduce backlash growth caused by wear. The external bearing nut provides the ultimate in shaft retention and shaft power. Output could be a spindle shaft or different sizes of essential pinion gears.