PTO drive shaft

You may want to cut your driveline to the proper length, for operational overlap. If you raise your implement to achieve the shaft on, you could end up damaging your equipment.
When your equipment isn’t in use and is stored outside, take the PTO shaft off the machine, tractor, or mower and retail store it inside in order to avoid rust-causing moisture, and also to prolong the life of your driveline.

EPT Parts can help you get the PTO driveline you need! Shop PTO shaft drivelines.

Also, know the quantity of torque and horsepower had a need to move through your PTO shaft. Male and female parts should have at least 6 inches overlap for torque load.

By integrating the mechanical and hydraulic factors with electronic equipment control and administration, Industries satisfies the necessity of modern agriculture that needs increasingly complex and technologically evolved machinery.
Our patented coupling mechanism C Line may be the result of our understanding and development. It enables convenient coupling and uncoupling of the PTO drive shaft. The cover supplies the user more ease due to its ergonomically and small form. The users’ security is assured, because he can’t acquire entangled in protruding elements of the yoke. Addititionally there is much less dirt present at managing and there will be fewer difficulties linked with it.
We designed, especially for our consumers, a protective cone which is flexible and permits easier handling while coupling the PTO on the tractor or perhaps working machine. The versatile cone offers additional convenience when coupling the PTO, because you can get a good grip in the limited shaft space.
Our PTO drive shafts enable the user easy maintenance. The greasing nipples on standard crosses sit under angle to enable an individual better access. Easier access is also possible due to the versatile cone. We listened to the wants of our clients and located the greasing nipple at wide-angle PTO’s in to the cross bearing. The additional novelty, we launched with wide-angle PTO travel shafts is in range greasing. We wanted to additionally simplify the repair and prolong the lifespan of joints.
In our company we are aware of the importance of the users’ safeness. A key factor for safeness assurance is the accession in the items’ development phase. By all means, the users’ knowledge about the correct use of a PTO drive shaft is essential. This means, that every users’ duty is definitely to read and follow the basic safety instructions.
The standard of products is for all of us and for our customers of substantial significance. We as well perform constant control of incoming products and the control of finished products. In our company we job according to ISO 9001.
Be aware the bearing diameter, cap-to-cap overall duration, and snap ring type.
Measure the bearing cap diameter. Most u-joints possess uniform cap diameters. (Cap diameters may differ among Regular Velocity drivelines). Evaluate all caps.
Measure the cross-kit width, cap to cap length: the u-joint, end of cap to get rid of of cap. You’ll obtain the most exact measurement for discovering the right PTO shaft by detatching the cross-system from the yokes.