High-Quality Right Angle Gear Drives are created for efficiency, quiet procedure, and long service existence. SDP/SI offers a broad selection of Right Angle Equipment Drives in a variety of configurations, materials, operating speeds, and multiple ratios. Standard catalog products include precision and industrial quality gear drives offered in both ” and metric sizes. For modifications or custom designs call and talk with a SDP/SI applications engineer.
Our providing includes, but isn’t limited to the following:
Miniature sized Right Position Gear Drives, 1 inch square, are ideal for compact designs that require low backlash and insight boosts to 2000 rpm.
When weight is an issue, get Right Angle Bevel Gear Drives that include a lightweight casing of PTMT Polyester 30% glass filled, precision surface stainless shafts, sintered bronze bearings and molded nylon gears.
Right Angle Worm Equipment Drives accommodate input speeds up to 2000 rpm and are available in gear ratios: 5:1, 10:1 and 20:1.
Right Angle and Dual Helical Equipment Drives are offered in two versions, light-duty, rated boosts to 600 rpm and durable, rated boosts to 1725 rpm.
An economy series of Correct Angle Bevel Gear Drives is offered in 1:1 and 2:1 ratios and rated boosts to 500 rpm.
E Series Right Angle
The Ever-Power Electronic Series is a higher efficiency, right angle gear reducer made for increased torque density, reduced inventory and improved efficiency. Through the use of modified helical-bevel technology, the Electronic Series has the capacity to operate at 90% efficiency and can offer up to 60% higher torque when compared to a typical worm gear reducer. Through various accessories and modular elements, the E Series recreates the essential dimensions of a typical worm gearbox and provides the chance to reduce inventory.
Right-angle Worm Gearboxes
4 sizes available with ratings to 27 HP.
Available in single, double & triple reduction.
Ratings from 7.8:1 to 59:1.
EP-worm-gearboxsEP Series variants, worm gear family
Ever-Power has been in the forefront of developing equipment technology to fill certain requirements of our OEM clients. Our close partnerships with this installed customer bottom provided much insight into their evolving dependence on more high-precision right-angle gearing options. In order to fill that need, Ever-Power expanded upon our correct angle item offering to include a variety of high-precision worm gearboxes, known as our EP Series.
These servo grade speed reducers are perfect for the most difficult of movement control applications. Each series incorporates a globoidal worm gear mesh design to be able to achieve the torque handling capability and the highest levels of precision that our SHIMPO customers attended to anticipate from us. The input style of our EP right-angle gearbox applies the same concept of motor modularity that’s common across our High Precision item family, meaning our clients and distribution partners get the same degree of flexibility, product range, and overall availability that’s unparalleled in your industry.
Advantages of the EP Series system design;
Quiet operation, in comparison to other competitive worm gearing
Compact, with precise right angle worm gearbox reduction ratios
High torsional rigidity and torque carrying capacity
A lower life expectancy backlash feature, unique among right-angle gearheads
Industry standard hollow bore result with other shafted options
Extremely lightweight, optimized construction
Free of maintenance, lubrication for lifetime
These right-angle servo grade gearboxes are ideal for applications within custom assembly and test systems, packaging equipment, steel cutting and steel forming machinery, general purpose automotive, among many others. If the application requires the compact footprint of a right-angle worm equipment without sacrificing on the efficiency, contact Ever-Power about the EP Series today.
Standard Right Angle Gearbox Features
All ratios built with right-hand worm gears
Load capacity unaffected by direction and rotation
Variety of mounting Options
Upon Request:
Left-Hand Gears
STAINLESS Input/Output Shafts
Solid or Hollow Output Shaft
Decide on a Gearbox or Speed Reducer
Worm Gear Swiftness Reducers
sw-1-parent.jpg
SW-1
SWB-5 & SW-5
Right Angle Miter Equipment Drives
miter-gear-parent.jpg
Miter Gear Drives
Mini Right Angle Helical Gear Drives
miniature-right-angle-parent.jpg
RA-200
RA-300
Custom Speed Reducers
custom-speed-reducer-parent.jpg
Custom Speed Reducers
GEARBOX REDUCERS
Correct angle gearboxes (worm and planetary) are rugged and built for 90° turns. Inline reducers (parallel shaft and planetary) are a perfect match for motors with high input speeds, or when gearmotor efficiency is important. Get in touch with our technical sales staff for help identifying which gearbox answer is best for you.
RIGHT ANGLE REDUCERS
WORM GEAR REDUCER
EP’s worm equipment reducers were created with a hollow bore and allow for a corner switch with optional dual output. The reducers can be found in 12 ratios which range from 5:1 to 100:1, with non-back-drivable ratios 30:1 and higher. Our correct angle gearboxes are designed with five mounting options providing flexibility when incorporating the reducer into product.
RIGHT ANGLE BEVEL GEARBOX
bevel-right-angle-gearbox
The proper angle bevel gearbox combines the top features of our correct angle worm and planetary inline reducers. With a solid and efficient right angle configuration, our 
right angle planetary gearboxes offer a robust solution. The right angle bevel gearbox will come in 18 ratios which range from 5:1 to 1000:1, and it is back-drivable at all ratios.
INLINE REDUCERS
I-SERIES PLANETARY GEARBOX
i-series-planetary-gearbox
Our I-Series little planetary gearbox configurations supply the smallest footprint and quietest procedure of our velocity reducers. These gearboxes are designed to manage varying loads with little backlash. With body sizes 52cm, 62cm, and 81cm, 12 ratios which range from 5:1 to 308:1, we’ve a solution to suit your needs. Our 52 frame size is also available with plastic gears for noise-delicate applications.
INLINE PLANETARY GEARBOX
inline-planetary-gearbox
Our inline planetary gearbox configurations provide the highest efficiency and best result torque of all our speed reducers. These gearboxes are made to deal with varying loads with small backlash. Planetary gear reducers operate more quietly than parallel shaft reducers. With 18 ratio choices which range from 5:1 to 1000:1, we have a solution to suit your needs.
PARALLEL SHAFT GEARBOX
parallel-shaft-gearbox
Parallel shaft gearboxes are the best choice for continuous duty applications. Their equipment cluster design provides an effective method for dissipating warmth. Parallel shaft gearboxes have the shortest amount of our inline gear reducer options therefore they work well in conditions with limited space. Our parallel shaft equipment reducers offer an affordable drop-in substitute solution for most small parallel shaft gearmotors.
Wormwheel gearboxes go by several names, including 90-degree gearboxes, right position gearboxes, acceleration reducers, worm equipment reducers and worm drive gearboxes. Gear reduction boxes feature a gear arrangement when a equipment in the type of a screw, also called a worm, meshes with a worm equipment. These gears are typically created from bronze and the worms are steel or stainless steel.
While worm gears are similar to a spur gear, the worm gearboxes are significantly smaller than other gear reduction boxes. A primary benefit of worm gear reducers is definitely that they generate an output that is 90° from the input and can be utilized to transmit higher torque or reduce rotational speed. Most often, a worm gearbox has right hand threads; to improve the direction of the result, a left-hands thread worm gearbox is required.
Worldwide HdRS133-10/1-R Cast Iron Right Angle Worm Gear Reducer 10:1 Ratio
Cast Iron Worm Equipment Reducers are available in center distances 1.33 – 3.25 inches in ratio’s from 5:1 to 60:1. The models possess a one piece #Fc20 all cast iron housing, NEMA electric motor quill style input flanges or shaft inputs, come pre-packed with synthetic oil and have a 1 year warranty.
Features:
Tapered roller bearings upon the input and output shafts
Embedded double-lip oil seals
Anti-rust primer applied outside and inside of the gearbox
Air dry special black paint
Product Specifications
OUTPUT SPEED (RPM) 175
OVERHUNG LOAD LBS. 300
EFFICIENCY 86
BRAND EP
MANUFACTURERS PART Quantity HdRS133-10/1-R
CROSS REFERENCE Boston 713; Grove B213
DESCRIPTION Cast Iron Right Ange Worm Gear Reducer
BACKLASH (FT.) (ANGULAR Mins) 27
OUTPUT SHAFT THRUST LOAD (LBS.) 300
MAX INPUT HP 0.77
MAX TORQUE (IN-LBS.) 247
WCD CENTER INCHES 1.33
GEAR RATIO 10:1
Ever-Power EP series triple-reduction worm gear swiftness reducers are available in ratios from 5000:1 to 175,000:1 and center distances from 7” to 20” (larger sizes available on request). Result torque ranges from 33,000 in pounds. for the 7” CD EP-70 to 582,900 in lbs for the EP-200. Mechanical HP insight requirements are from 0.09 HP for the 175,000:1 7 in CD reducer to 6.25 HP for the 5000:1 20” CD unit. These reducers can be found in four configurations: horizontal, vertical, shafted, and shaft mounted.
These reducers are well suited for water/waste-water gear drive applications such as thickeners and clarifiers, which need a vertical straight down shaft. Other offered configurations also make Ever-Power triple reduction reducers perfect for make use of on mixers, elevators, solar panels, astronomical telescopes, indexing tables, hoists, conveyors, or various other process or materials handling systems where huge torques/gradual speeds are needed.
These reducers are also available with a helical main reduction stage and are termed the HDVM series
Enclosed Gears / Gearboxes
Enclosed gears, also referred to as gearboxes or swiftness reducers, are open gears within a housing. The casing facilitates bearings and shafts, keeps in lubricants, and protects the components from surrounding conditions. Gearboxes are available in an array of load capacities and velocity ratios.
The objective of a gearbox is to improve or reduce speed. Because of this, torque output would be the inverse of the function. If the enclosed drive is a acceleration reducer, the torque output increase; if the drive improves speed, the torque result will reduce. Gear drive selection elements include: shaft orientation, acceleration ratio, design type, character of load, gear rating, environment, mounting position, working temperature range, and lubrication.
Basic Types of Gearboxes
Worm Gear Speed Reducers
A single reduction swiftness reducer can achieve up to a 100:1 reduction ratio in a little package. Known as right angle drives, these contain a cylindrical worm with screw threads and a worm. With a single begin worm, the worm gear advances only one tooth for each 360-degree convert of the worm. So, whatever the worm’s size, the apparatus ratio may be the ‘size of the worm equipment to 1′. Higher reduction ratios could be created by using double and triple reduction ratios.
Helical Gear Speed Reducers
Provide high-efficiency speed reduction through 1, 2, 3, or 4 units of gears. Power is definitely transmitted from a high-swiftness pinion to a slower-speed gear. Helical gears usually operate with their shafts parallel to each other. Both most common types will be the concentric (input and output shafts are in series) and parallel shaft (input and result shafts are offset). Single-stage helical gear reducers are typically used for equipment ratios up to about 8:1. Where cheaper speeds and higher ratios are required, dual, triple, and quadruple gear reduction stages may be used.