Hanging Pulleys for Rope-For Horizontal Pulling
Hang these pulleys from hooks, screws, and bolts to assist with horizontal pulling or to guide a rope.
Pulleys with two grooves are for make use of where multiple pulleys move a single load, such as block and tackle systems. They require about 50 % the push of a single-groove pulley to go the same load.
Pulleys with a bearing are easier to switch than pulleys without a bearing.
Acetal, nylon, and aluminium are lightweight and corrosion resistant. Stainless steel may be the most corrosion resistant.
Designs C, D, and J have got a bracket on underneath for tying off a single end of a rope.
Style K decrease the force needed to keep your load set up. Unlike standard pulleys, these possess a V-groove for more hold on your rope, plus they ratchet when under load therefore they don’t slip in the various other direction. Pulley for3/8″ dia. rope can be arranged to ratchet even when not under load.
Mounted Pulleys for Rope-For Horizontal Pulling
Mount these pulleys to a set surface to aid with horizontal pulling or to guide a rope.
Pulleys with a bearing are simpler to convert than pulleys without a bearing.
Aluminum and nylon are light-weight and corrosion resistant. Stainless gets the most corrosion resistance.
Pulleys for Rope-For Horizontal Pulling
Also called sheaves, use these pulleys to aid with horizontal pulling or to guide a rope.
Pulleys with a bearing are easier to convert than pulleys with out a bearing.
Acetal and light weight aluminum are light-weight and corrosion resistant. Galvanized metal is more corrosion resistant than iron and metal. Stainless steel may be the most corrosion resistant.
Easy-Open up Hanging Pulleys for Rope-For Horizontal Pulling
Also known as snatch blocks, these pulleys open so it’s simpler to feed the rope through the housing-a totally free rope end is not needed. Use them to assist with horizontal pulling or to guide a rope.
Pulleys with a bearing are easier to switch than pulleys without a bearing.
Aluminum is more lightweight than stainless steel. Stainless steel is usually more corrosion resistant than light weight aluminum.
Pulleys for Wire Rope-For Horizontal Pulling
Also referred to as sheaves, use these pulleys to assist with horizontal pulling or to guide a rope.
Pulleys with a bearing are simpler to change than pulleys without a bearing.
Acetal and nylon are light-weight and corrosion resistant. Stainless steel is the most corrosion resistant.
Mounted Pulleys for Wire Rope-For Horizontal Pulling
Mount these pulleys to a flat surface to assist with horizontal pulling or to guide a rope.
Pulleys with two grooves are for make use of where multiple pulleys move an individual load, such as for example block and deal with systems. They require about 50 % the drive of a single-groove pulley to move the same load.
Pulleys with a bearing are easier to turn than pulleys without a bearing.
Stainless steel is definitely more corrosion resistant than steel.
Hanging Pulleys designed for Wire Rope-For Horizontal Pulling
Hang these pulleys from hooks, screws, and bolts to aid with horizontal pulling or to guide a rope.
Pulleys with two grooves are for use where multiple pulleys move a single load, such as block and tackle systems. They require about half the push of a single-groove pulley to move the same load. They have a bracket on the bottom for tying off one end of your wire rope.
Pulleys with a bearing are simpler to convert than pulleys without a bearing.
Nylon is lighter in weight than metal. Aluminum can be corrosion resistant. Stainless steel may be the most corrosion resistant.
Pulley with carabiner can mount to metal framing or hang as part of your rigging system.
Easy-Open up Hanging Pulleys for Wire Rope-For Horizontal Pulling
Also known as snatch blocks, these pulleys open so it’s easier to feed the rope through the housing-a free rope end is not needed. Use them to aid with horizontal pulling or to guide a rope.
Style D pulleys have a corrosion-resistant stainless housing.
Pulleys for Wire Rope-For Lifting
Utilize the bore to install these pulleys on a shaft. These pulleys are also known as sheaves.
Pulleys with a bearing are easier to change than pulleys with out a bearing.
Nylon pulleys are much lighter than steel pulleys.
Warning: Never use to lift people or items over people.
Mounted Pulleys for Wire Rope-For Lifting
Attach these pulleys to a set surface.
Pulleys with two grooves are for use in applications where multiple pulleys move a single load, such as for example block and deal with systems.They are able to reduce the force needed to move the load by up to two times compared to single-groove pulleys.
Pulleys with a bearing are easier to turn than pulleys without a bearing.
Stainless steel pulleys are more corrosion resistant that steel.
Style 3 pivots up to 200° for different pull directions.
Warning: Never make use of to lift people or items over people.
Hanging Pulleys for Wire Rope-For Lifting
Hang these pulleys from hooks, screws, and bolts.
Pulleys with two grooves are for use where multiple pulleys move a single load, such as block and tackle systems. They require about 50 % the force of a single-groove pulley to go the same load.
Pulleys with a bearing are simpler to change than pulleys without a bearing.
Style Electronic pulleys have bracket on the bottom that lets you tie off 1 end of your wire rope.
Warning: Never make use of to lift people or items over people.
Easy-Open Hanging Pulleys for Wire Rope-For Lifting
Also known as snatch blocks, these pulleys open so it’seasier to feed the rope through the housing-a totally free rope end isn’t needed.
Pulleys with two grooves are for use where multiple pulleys move an individual load, such as for example block and deal with systems. They require about 50 % the pressure of a single-groove pulley to go the same load.
Latch kits (sold separately) add a latch to the swiveling hook on Style C to keep rope secure.
Warning: Never make use of to lift people or items over people
Hanging Pulleys designed for Rope-For Lifting
Hang these pulleys from hooks, screws, and bolts.
Pulleys with two grooves are found in applications where multiple pulleys move an individual load, such as for example block and deal with systems. They can reduce the force needed to move the load by up to 2 times in comparison to single-groove pulleys.
Pulleys with a bearing are easier to change than pulleys without a bearing.
Style A pulleys possess a bracket on underneath for tying off 1 end of a rope.
Warning: Never make use of to lift people or items over people.
Easy-Open Hanging Pulleys for Rope-For Lifting
Also known as snatch blocks, these pulleys open so it is simpler to feed the rope through the housing-a totally free rope end isn’t needed.
Warning: Never make use of to lift people or items over people.