rotary cutter gearbox
rotary cutter gearbox
RC-20 Series
Technical specs
Torque: 1,750 – 3,267 lb.-in.
198 – 369 Nm.
Ratios: one:2.five, 1:two.83
Seals: Triple Lip Spring Loaded
Bearings: Deep Groove Ball
Oil Cap: 16 oz. (.47 L)
Bodyweight: 34 lbs. (15.4 kg)
Programs
Finishing Mowers Rotary Cutters
Rotary Slashers Toppers
RC-27 Collection
RC-thirty Collection
Technical specs
Torque: 2,800 – 4,667 lb.-in.
316 – 527 Nm.
Ratios: one:one.47, one:one.seventy one, one:one.ninety three
Seals: Triple Lip Spring Loaded
Bearings: Deep Groove Ball
Oil Cap: 23 oz. (.68 L)
Bodyweight: 51 lbs. (23.1 kg)
Purposes
Ending Mowers Rotary Cutters
Rotary Slashers Toppers
RC-51 Collection
Technical specs
Torque: 2,800 – 4,667 lb.-in.
316 – 527 Nm.
Ratios: one:1.47, 1:1.71, 1:one.93
Seals: Triple Lip Spring Loaded
Bearings: Tapered Roller/ Deep Groove Ball
Oil Cap: 27 oz. (.eighty L)
Excess weight: fifty six lbs. (25.four kg)
Purposes
Rotary Cutters Rotary Slashers
Gears: Offered with either straight bevel or spiral bevel gearing.
Electricity: Hp & Torque primarily based on AGMA formula for continuous duty furthermore a services or load course factor.
Shafting: Various dimensional, metallurgical, and heat-deal with possibilities offered.
Bearings: Geardrives accessible with numerous bearing life options.
Lubrication: Drives obtainable with different lubes based on operating attributes
Replacement Rotary Cutter gearbox, 40hp rated, one-three/8″-six spline enter shaft, 1.fifty seven” X 12 tapered spline output shaft and one:1.47 speed up ratio. These gearboxes have a square housing configuration and are equivalent in mounting and ratio to the round configuration gearboxes. These are original tools gearboxes on the IM402, IM502 and IM602 series rotary cutters which highlighted slip clutch PTO shafts. This gearbox will not suit the IM400, IM500 and IM60 versions as they have a sleek input shaft! If your gearbox has a 12 spline output shaft and a one-three/eight” – 6 
spline enter shaft this gearbox will function. Bolt sample is 4-3/four” on centre gap to hole and 6-3/4″ middle to center of bolt gap on diagonal. The mounting holes form a sq. bolt pattern.
rotary cutter gearbox
We respond to vital concerns regarding rotary cutter gearbox on our website.