Our standard 700 Series – the heart of Ever-Power acceleration reducer product line – has been serving industry reliably for over 10 years. Its proven modular design has set the sector standard for overall performance and is the most imitated item in today’s worm gear rate reducer market. But why accept a knock-off when you can have the initial – from Ever-Power.
Specifications
11 basic one reduction sizes
8 basic dual reduction sizes
1/6 – 25 HP
5:1 – 100:1 ratios single reduction
100:1 – 3600:1 ratios double reduction
Non-flanged, NEMA C-face quill, and coupled input styles
Projecting and hollow output shafts
Projecting diameters from 1/2″ to 2-1/4″
Hollow result bore diameters from 5/8″ to 3-7/16″ (with over 20 bore sizes in share)
Product Features
The 700 Series’ large oil reservoir provides efficient heat dissipation and lubrication for longer operating existence.
Its multi-position mounting versatility permits installation in practically any position.
Housings are straddle-milled, top and bottom, for precise alignment of horizontal and vertical bases.
Internal baffles assure positive, leak-free venting.
The 700 Series’ rugged casing, fabricated of fine-grained, gear-quality cast iron, provides optimum strength for maximum durability, along with greater precision during worm and gear alignment.
Ever-Power 700 Series high-strength bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to improve thrust and overhung load capacities, sizes 713-760.
Our 700 Series’ high-strength steel output shaft assures convenience of high torque and overhung loads.
Pipe plugs allow easy fill up, level, and drain in virtually any mounting position.
The 700 Series’ super-finished oil-seal diameters on both input and output shafts extend seal existence.
Both 2D and 3D CAD drawings are available in our eCatalog.
Ever-Power worm gearboxes possess earned a status to be an industry benchmark worldwide. Our achievement originated from our relentless drive for quality with state-of-the-art technology, all while offering worm gearboxes are affordable prices. High versatility accorded through a broad choice of mounting choices, shaft configurations and motor interfaces, makes the Ever-Power worm gearbox the default choice for the industry. The helical-worm and the double-worm edition, with or without the torque limiter, add up to the advantage, creating an extremely versatile drive system.
Ever-Power Worm gearboxes provide high torque with low speed gear ratio. Being 
basic and compact in style, these gears can achieve higher gear ratio than the helical gears. These worm reduction gears having screw type characteristics act like helical gears, but its helix position is typically comparatively bigger) and its own body is generally quite long in the axial path. The gears in these gearboxes can be correct or left-handed depending upon the purpose.
Mounting choice include universal housing, aspect flanges, foot (horizontal and vertical), shaft mounted with torque arm. Obtainable in Solid shafts (solitary or double), with torque arm or torque limiter.
Worm reduction gears features
Principles
A worm gear is a kind of interlocking gear composed of a worm shaft and worm wheel. The worm is certainly shaped such as a screw and the worm wheel can be a type of gear machined to get a tooth profile with the same configuration.
The procedure of a worm gear is comparable with that of a bolt and nut. The principle is the same as a nut that is fixed to ensure that it cannot rotate and for that reason progresses in the axial direction when the bolt is certainly turned.
The design of a worm gear is considered through the relationship between your rack and spur gear on the middle plane of the worm wheel.
Features
High reduction ratio One rotation of the worm rotates the worm wheel simply by one tooth. Due to this, in a 1 speed decrease gears, the wheel can be manufactured therefore that it’ll be rotated 1/60 (1/120 in particular applications).
Orthogonal shaft The shafts are aligned orthogonally because of the structure. This feature makes it possible to layout the turning transmitting direction at a right angle.
The arbitrariness of the rotation direction The screw direction of the worm can be clockwise or counterclockwise (generally clockwise). It is possible to change the rotation path of the worm wheel by changing the screw path.
A multitude of shaft layouts The wide variety of shaft layouts is one of the top features of interlocking gears.For example, right shaft output, remaining shaft output, dual shaft input and dual shaft output, etc., combine for a total of 14 types (Physique 2) and, if attachment orientations are included, you’ll be able to select from over 40 layouts.
Low noise, low vibration The interlocking of the worm and worm wheel is definitely characteristic because the contact is usually linear and the relative slide is excellent. In comparison with rolling power transmission, noise and vibration are extremely low. For this reason, this technology can be used to drive medical devices, elevators and escalators, etc.
The principal specifications of worm reduction gears
MA Series(Small)
Center distance(mm) 32,40
Reduction ratio 10,20,30,40,50,60
Input capacity(kW) 0.1～1(at an input of 1800 rpm)
Output torque(N・m) 20～66
Input speed(rpm) 0～1800
MA Series(Medium)
Center distance(mm) 50,63,80,100,125,140,160
Reduction ratio 10,15,20,25,30,40,50,60
Input capacity(kW) 0.4～30(at an input of 1800 rpm)
Output torque(N・m) 900～3570
Input speed(rpm) 0～1800
S Series
Center distance(mm) 50,60,70,80,100,120,135,155,175,200,225,250,300,350,400,450,500
Reduction ratio 10,15,20,25,30,40,50,60
Input capacity(kW) 0.3～255(at an input of 1800 rpm)
Output torque(N・m) 50～56600
Input speed(rpm) 0～1800
Key points when selecting a worm reduction gears
Selection
When choosing a worm reduction gears, the procedures for selecting the right gear are described in the maker catalogs and the series and models should be selected according to those procedures. Particular care should be taken in essential areas such as selecting the strain index, calculating the overhang load and examining heat rated capacity from the manufacturer.
Cautions during use
When utilizing a worm decrease gears, the heat produced through the initial period of use is high and running-in operation at 1/4, 1/2 and 3/4 of rated torque for eight hour periods is key to sufficiently attaining the performance of the worm reduction gears.
Maintenance and inspection
After completing running-in procedure (approximately 50 hours), it’s important to change the lubricating oil and also to change the lubricating oil from then on about 1 time per year according to the procedure manual provided by the manufacturer.
Product Description
The Worm Decrease Gear Box is supplied by our company is of supreme quality. Our products are created by using premium quality materials and enhance technology at our vendors end. These are widely used in a variety of sectors. Our products are often available at a very low market prices.
Motor Mount Frame Options
TEC Motors, worm reduction gearbox.
Option A-160 B5 Framework, Flange Mount.
Choice B-132 B14 Frame, Face Mount.
Option C-100/112 B5 Frame, Flange Mount.
High efficiency and secure operation. High load capacity and overload functions. Result Torque = (Power (kW) x 9550 (Constant))/ Gearbox output speed (rpm).
Higher ratios on request dependent on service factor (40:1, 50:1, 60:1, 80:1, 100:1)
DESCRIPTION
Wormgears of the VF series are milestones for the market worldwide. They succeeded in combining uncompromising quality with stateoftheart technology amd renown cost effectiveness.Absolute versatility is distributed by the wide selection of several mounting options, shaft configurations and engine interface, all offered as standard. The helicalworm and the doubleworm version, with or without the torque limiter, also add up, creating an extremely versatile drive system.
ADDITIONAL INFORMATION
AMP
0.42 A
EFFICIENCY
84%
HP
0.12
KW
0.09
RATIO
7
RPM
200
TEMPERATURE RATING
20 degree C TO 80 degree C
TORQUE
4 Nm
HSN
8483.40.00
WARRANTY PERIOD
12 Months
The worm reduction gears can be found in two series: X and H.
The series X, featuring a worm and worm wheel set, comes in versions XA with shaft and XF-XC with mounting provisions for motor.
Version XF (bell housing + coupling) Worm Reducer offers great versatility to suit a broad range of applications and higher efficiency than the compact series XC, where in fact the emphasis is on space efficiency.
Series H offers the same features since series X with an added plus: a spur gear pre-stage at the insight end provides higher efficiency and a broader range of ratios than the X series.
Body sizes 110 and 90 include a cast-iron housing cast enbloc, whereas smaller sizes make use of die-cast aluminium housings. The worm shaft is produced from casehardened and hardened alloy steel and ground-finished.
The worm wheel includes a cast iron hub with cast bronze insert. Hollow output shaft comes as standard.
Broad range of options available:
second input, result flange, single or double extension output shaft, torque limiter with through cable, torque arm.